# Electric Drives Mcqs

Q:

Calculate the PIV for the Full-wave bridge rectifier if the peak value of the supply voltage is 50.

 A) 72.5 V B) 72.8 V C) 70.7 V D) 76.1 V

Explanation: The peak inverse voltage for the Full-wave bridge rectifier is Vm = √2×230=70.7 V. The peak inverse is the maximum negative voltage across the thyristor.

66
Q:

Calculate the maximum frequency for ASCI using the data: R=1 kΩ, C=1 μF.

 A) 250 Hz B) 280 Hz C) 300 Hz D) 320 Hz

Explanation: The minimum time period for ASCI is a 4×R×C=4×1×1×.001=4 msec. The total time is the sum of charging and discharging time. The maximum frequency is 1÷f=250 Hz.

58
Q:

181
Q:

Reactance relay is used in _______

 A) Medium line B) Short transmission line C) Lossless line D) Long transmission line

Explanation: Reactance relay is used in a short transmission line. Reactance relay is independent of the resistance value. It protects the short transmission line from any fault.

37
Q:

Calculate the value of the fault impedance if the fault voltage is 2 V and fault current is 4 A.

 A) .5 ohm B) .2 ohm C) .4 ohm D) .6 ohm

Explanation: The value of the fault impedance is the ratio of fault voltage and fault current. It is expressed in ohms. Z=V/I=2/4=.5 ohm.

53
Q:

Inter turn fault can be detected by using __________

 A) Oil circuit breaker B) Split phase relay C) SF6 circuit breaker D) Vertical breaker

Explanation: Inter turn fault mainly occurs in the winding of the rotor side of the alternator. They can be detected by using the split-phase relaying technique.

53
Q:

Full form of LED is _____________

 A) Light Emitting Diode B) Light Emission Digital C) Light Energy Diode D) Light Energy Digital

Explanation: The full form of LED is a light-emitting diode. It converts light energy into electrical energy. It works in the reverse bias region.

42
Q:

Mho relay is used in the medium transmission line.

 A) True B) False